An AP story on the big bears of Katmai quotes a young lady psychologist on her mind-blowing honeymoon there in Brown Bear Heaven.
“There’s a bear in the water, and there’s a bear coming down the beach ... and then, we were coming in to eat and there was a bear running by, and there were three bears just over there by the river. So, that was amazing to have it so accessible.”
A mis-attribution? Actually, I think that's what the bears said.
Aug 14, 2013
Aug 13, 2013
Travis McGee said...
"A truly lazy man is always misunderstood." I qualify in spirit and even grammatically under all three modifiers and the object of the verb. No problem. I'm used to it.
It's when I break the pattern that my fellow Smugleye-On-Lake-ites really get confused. I half-expected someone to call in a dustoff at sunrise when they spotted me stacking firewood and titivating the grounds for all I was worth.
Everything before eight was quiet work, then noisy gear was deployed -- the little blade tractor, leaf blower, power washer. Aside from the firewood and general pretty-up, the driveway is graded; the mailbox approach is rut-free and somewhat leveled, and the moss and grime has been blasted from the seldom-used but highly visible guest-cabin deck. There's more, but I'd sure hate to be accused of bragging.
It's amazing how much a man can accomplish before 10:30 a.m. with a drastically reduced cable television input. And when he decides that Blogger has no authority to demand that he write something every day, before breakfast.
It's when I break the pattern that my fellow Smugleye-On-Lake-ites really get confused. I half-expected someone to call in a dustoff at sunrise when they spotted me stacking firewood and titivating the grounds for all I was worth.
Everything before eight was quiet work, then noisy gear was deployed -- the little blade tractor, leaf blower, power washer. Aside from the firewood and general pretty-up, the driveway is graded; the mailbox approach is rut-free and somewhat leveled, and the moss and grime has been blasted from the seldom-used but highly visible guest-cabin deck. There's more, but I'd sure hate to be accused of bragging.
It's amazing how much a man can accomplish before 10:30 a.m. with a drastically reduced cable television input. And when he decides that Blogger has no authority to demand that he write something every day, before breakfast.
Aug 10, 2013
Travis McGee is sad
He mentioned her more than once. She got him through one lonely night aboard The Busted Flush, balladeering in Spanish with Trio Los Panchos. She made many another 60s pop/jazz star sound like a soloist at the swing choir recital.
RIP, Edie Gorme.
RIP, Edie Gorme.
Aug 7, 2013
Six weeks agoe I cudnt evin spell gunsmith
...Undoubtedly more than you want to know about that First Series Colt Woodsman Match Target that moved in a few weeks ago, the one who didn't bring a magazine along. So sue me.
I mentioned in the second post down that I found an old High Standard HD mag for it, along with a similar empty body. I claimed I could make the follower and find some sort of workable spring.
Half done in less than 45 minutes.
The left follower is the new one. It looked correct and measured correct. Just to make sure, I installed it in the mag with the spring. Works fine.
Two complications remain. A spring could turn up in one of my "miscellaneous" boxes during my next paw-through. If not, almost any from a gun-show-junk .22LR magazine should be adaptable.
The retaining pin will give me more trouble. JMB designed it as slip-in. The groove under the head holds things together by engaging the body tin. There's no lathe here, so I'm leaning toward tapping the hole for a 6-32 machine screw. Might work. Might get a better idea.
The new follower began life as a steering arm from a junked-out Dixon ZTR42 mower. Most of it went to Ken's iron pile, but I squirreled away a few likely looking bits of steel for just such an emergency gun repair. Because I live a pure and virtuous life, the handle happened to be the exact thickness of the factory follower, saving me some tedious surface grinding.
Tools involved: Makita angle grinder. Baldor bench grinder. One-inch vertical belt sander obviously built by a Mattell subsidiary. Twelve-inch muslin polishing wheel on big old 3450 rpm Craftsman table saw motor. Chinese drill press. (Twenty minutes after you drill a hole you want to make another one.) Couple of mill bastards.
Technique: Use the factory part for a pattern. Cut your new one a few thousandths oversize. Trim to fit. (That's what the bastards are for.) Shine her up a little.
I mentioned in the second post down that I found an old High Standard HD mag for it, along with a similar empty body. I claimed I could make the follower and find some sort of workable spring.
Half done in less than 45 minutes.
The left follower is the new one. It looked correct and measured correct. Just to make sure, I installed it in the mag with the spring. Works fine.
Two complications remain. A spring could turn up in one of my "miscellaneous" boxes during my next paw-through. If not, almost any from a gun-show-junk .22LR magazine should be adaptable.
The retaining pin will give me more trouble. JMB designed it as slip-in. The groove under the head holds things together by engaging the body tin. There's no lathe here, so I'm leaning toward tapping the hole for a 6-32 machine screw. Might work. Might get a better idea.
The new follower began life as a steering arm from a junked-out Dixon ZTR42 mower. Most of it went to Ken's iron pile, but I squirreled away a few likely looking bits of steel for just such an emergency gun repair. Because I live a pure and virtuous life, the handle happened to be the exact thickness of the factory follower, saving me some tedious surface grinding.
Tools involved: Makita angle grinder. Baldor bench grinder. One-inch vertical belt sander obviously built by a Mattell subsidiary. Twelve-inch muslin polishing wheel on big old 3450 rpm Craftsman table saw motor. Chinese drill press. (Twenty minutes after you drill a hole you want to make another one.) Couple of mill bastards.
Technique: Use the factory part for a pattern. Cut your new one a few thousandths oversize. Trim to fit. (That's what the bastards are for.) Shine her up a little.
Subscribe to:
Posts (Atom)